SERVICE RAM ADDRESSES
B576 3-74 SM
6800E6(H) - User parameter switch 22 (SWUSR_16): Not used
6800E7(H) – User Parameter switch 23 (SWUSR_17) : Not used
6800E8(H) - User parameter switch 24 (SWUSR_18)
Bits 0 and 1: File retention time (Cross reference: System switch 02 bit 4)
Bit 1 0 Setting
0 0 File retention impossible
0 1 24 hours
1 0 File retention impossible
1 1 72 hours
Bits 2 to 7: Not used
6800E9(H) - User parameter switch 25 (SWUSR_19)
Bits 0 to 3: Not used
Bit 4: RDS operation
0: Not acceptable
1: Acceptable for the limit specified by system switch 03
Note: This bit is only effective when RDS operation can be selected by the user
(see system switch 02).
Bits 5 to 7: Not used
6800EA to 6800EF(H) - User parameter switch 26 to 31 (SWUSR_1A to 1F),
Not used
6800F0 – User Parameter Switch 32 (SWUSR_20)
Bit 0: Priority destination for transfer, 0: Fax number, 1: E-mail address
Bits 2 to 7: Not used
680180 to 68019F(H) - Service station’s fax number (SP3-101)
See 68036C(H) for the type of network used for this number.
6801A0 to 6801A3(H) - Own fax PABX extension number
6801AA to 6801B3(H) - Own fax number (PSTN)
6801F8 to 68020B(H) - PSTN-1 RTI (Max. 20 characters - ASCII) - See the
following note.
68020C to 68021F(H) - PSTN-2 RTI (Max. 20 characters - ASCII) - See the
following note.
680237 to 680276(H) - TTI 1 (Max. 64 characters - ASCII) - See the following
note.
680277 to 6802B6(H) - TTI 2 (Max. 64 characters - ASCII) - See the following
note.
6802F7 to 68030A(H) - PSTN-1 CSI (Max. 20 characters - ASCII)
68030B to 68031E(H) - PSTN-2 CSI (Max.20 characters - ASCII)
680333(H) - Number of PSTN-1 CSI characters (Hex)
680334(H) - Number of PSTN-2 CSI characters (Hex)
If the number of characters is less than the maximum (20 for RTI, 64 for TTI), add a
stop code (FF[H]) after the last character.
To Next Page
Loading...
