Ricoh J-P2 - Page 247

17 January, 2003 PRINTER ENGINE SERVICE MODE
5-59
Service
Tables
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
3 Color Selects the color for making a test pattern.
[0 to 6 / 6
/ 1/step] Alphanumeric
0: Red 1: Green
2: Blue 3: Yellow
4: Magenta 5: Cyan
6: Black
4 Mode Selects the color mode for making a test print.
[0 or 1 / 0
/ 1/step] Alphanumeric
0: Full Color 1: Single Color
5 Resolution Selects the resolution for making a test print.
[0 to 2 / 1
/ 1/step] Alphanumeric
0: 600x600 1: 1200x600
2: 1200x1200
6 MLT Paper Size Selects the paper size for making a test pattern
from the by-pass table.
[0 to 3 / 0
/ 1/step ] Alphanumeric
0: A4 LEF 1: LT LEF
2: A3 3: DLT
997
7 Print Exe Prints the test pattern with the settings specified
with SP5-997-001 to 006.
NOTE: When exiting the SP mode, the test print
mode is automatically canceled.
[Memory Clear 2]
NOTE: For more information, see “NOTE 1” following this table.
1 ENG Setting Clears the engine settings except for counters.
998
2 ENG Counter Clears all counters.