17 January, 2003 OPTIONAL UNIT INSTALLATION
1-27
Installation
9. Align the cushion [A] as follows and attach it to the backboard [B]:
• Align the top side with the bottom end of the lowermost slot of the right side
stand [C].
• Align the right side with the left side of the right side stand [D].
NOTE: The cushion prevents the right side stand [H] from damaging the
scanner cable [I]. The cushion can be ineffective if attached to an
incorrect position.
G367I905.WMF
G367I903.WMF
[A]
[B]
[C]
[D]
[I] [H]
To Next Page
Loading...
