OPTIONAL UNIT INSTALLATION 17 January, 2003
1-28
10. Place the pad [A] on the table board [B].
11. Place the scanner unit [C] on the table board so that the scanner unit legs [D]
line up with the indents [E] in the table as shown.
12. Secure the scanner unit in place (! x 2 [F] and spacers [G] enclosed as
accessories for the optional rack).
13. Remove the shipping tape from the scanner cables.
14. Lead the scanner cable [H] along the inside of the rack as shown, then connect
it to the IPU board on the controller frame.
G367I105.WMF
G367I208.WMF
[D]
[E]
[C]
[F]
[G]
[G]
[F]
[A]
[B]
[H]
To Next Page
Loading...
