Ricoh Taurus-C1a - Page 118

Technical Bulletin PAGE: 3/7
Model: Taurus-C1a/C1b (D074/D075) Date: 21-Nov-11 No.: RD074033
3. Installation
Installation Overview
Step 1. Installing the exclusive bracket(s)
Step 2. Removing the guide plate supplied with the GBC StreamPunch (if installed)
Step 3. Installing the exclusive guide plate
Step 4. Docking the GBC StreamPunch with the mainframe
Step 5. Mainframe height adjustment
Step 1. Installing the exclusive bracket(s)
The bracket(s) you install in this step will differ depending on whether the D544
Decurler unit is installed on the copier/printer or not.
z If the D544 Decurler Unit is installed on the main machine, use the special bracket.
(Case A)
z If the D544 Decurler Unit is not installed, use the brackets supplied with the GBC
StreamPunch. (Case B)
Case A
Install the special bracket [A] (4 screws) if the D544 Decurler unit is installed on the
main machine.
[A]
BRACKET:ADAPTER
SECTION:GBC:PEEN (M0774703)