Technical Bulletin PAGE: 4/7
Model: Taurus-C1a/C1b (D074/D075) Date: 21-Nov-11 No.: RD074033
Case B
Install the brackets supplied with the GBC StreamPunch if the D544 Decurler unit is not
installed. Use [A] for the rear side and [B] for the front side.
Step 2. Removing the guide plate supplied with the GBC Stream Punch
2.1. If installed on the punch unit, remove the guide plate [A] supplied with the GBC
Stream Punch. Keep the screws you removed. You will need them to install the
special guide plate (Step 3).
[A] [B]
[A]
To Next Page
Loading...
