Technical Bulletin PAGE: 2/4
Reissued:30-Apr-13
Model: Taurus-C1a/C1b (D074/D075) Date: 14-Mar-12 No.: RD074053c
5. Remove the sensor bracket [D] (Screw x1).
6. Carefully move the belt [A] to the non-operator side until the sensor [B] is uncovered.
Note
It is recommended to wear gloves when moving the ITB.
Do not further move the belt once the sensor is uncovered. Doing so could damage the belt.
[A]
[B]
[D]
To Next Page
Loading...
