Technical Bulletin PAGE: 6/16
Model: Taurus-C1/P1 (D074/D075/M044) Date: 10-Apr-12 No.: RD074060
How to check whether the unit is installed with the modified shift roller or the
unmodified shift roller
1. Insert your hand in the opening indicated with the red circle in the photo below and
turn the cam clockwise until the shift roller separates and the registration gate moves
to its highest position.
2. Prepare a gauge using an OHP transparency of thickness between 0.05mm and
0.12mm and draw a reference line at 20mm from the edge. Insert the gauge in
between the shift roller and the registration gate by sliding it in from the front side.
To Next Page
Loading...
