T
echnical
B
ulletin PAGE: 3/6
Model:
Taurus-C1a/C1b/P1 (D074/D075/M044)
Date:
13-Jun-12
No.:
RD074074
Modification Procedure
Follow the procedure below for EVERY drum cleaning unit; YMCK.
Work time is approximately 10 minutes per station.
1. Removing the component parts
1-1. Remove the apply blade.
1-2. Remove the stay.
1-3. Lift up the areas marked
with red circles to release
the pressure, and then,
remove the lubricant bar.
Stay
Modified in step 2
Sheet Mylar
Peeled off in step 3
To Next Page
Loading...
