T
echnical
B
ulletin PAGE: 18/20
Reissued:18-Feb-13
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
08-Jan-13
No.: RD074097c
Additional Information on Troubleshooting
This section explains how to troubleshoot problems by using additional adjustment functions. Read it in
conjunction with 3, "Troubleshooting Image Quality Problems", and 4, "Troubleshooting Paper Delivery
Problems".
Textured paper: White spots/dense printing
Cause:
White spots on a textured surface
The paper transfer roller voltage for "Txt Ppr: Ppr Trns Voltage:B&W/FC: Side 1/2" (No. 44 – No. 47 in
Advanced Settings) is too low.
Dense printing on a textured surface
The paper transfer roller voltage for "Txt Ppr: Ppr Trns Voltage:B&W/FC: Side 1/2" (No. 44 – No. 47 in
Advanced Settings) is too high.
This is likely to occur if:
• Heavily textured paper is used.
• Thick paper is used.
• Documents with a small image area are printed continuously.
Solution:
Adjust the paper transfer roller voltage for numbers 44 to 47 in "Advanced Settings".
Specify the following settings in accordance with the print mode:
Print Mode Setting Items
44: Txt Ppr: Ppr Trns Voltage: B&W: Side 1 Black-and-white printing
45: Txt Ppr: Ppr Trns Voltage: B&W: Side 2
46: Txt Ppr: Paper Trnsf Voltage: FC: Side 1 Full color printing
47: Txt Ppr: Paper Trnsf Voltage: FC: Side 2
To Next Page
Loading...
