T
echnical
B
ulletin PAGE: 3/4
Reissued:1-Oct-13
Model:
Taurus-C1a/C1b (D074/D075)
Date:
27-May-13
No.:
RD074104a
4. Slide the tool from right to left. Keep the tool level as you slide it to prevent scratches
on the development roller.
NOTE
Both ends of the tool can be used. Locate the hole on the tool. Slide the tool from Right
Æ Left when inserting the end having the hole. Slide the tool from Left Æ Right when
using the other end.
Use this end to slide Right Æ Left.
Use this end to slide Left Æ Right.
To Next Page
Loading...
