Technical Bulletin PAGE: 12/58
Model: Taurus-C1 / P1 Date: 21-Oct-11 No.: RD074026
[D] Caution When Turning Off the Main Power Switch decal
1. Attach the decals at the locations shown above.
[A] Precautions for Printing decal
[B] Caution When Turning Off the Main Power Switch decal
<Main Machine \ Installation: Power On >
The following description was deleted accordingly with the adoption of the pre-installed
developer.
Open Both Front Doors
Install Developer
Do SP3025-001
Close Both Front Doors
Clean and Lubricate the Drums
Initialize TD Sensors
<Main Machine \ Checking the Print Quality \Color Registration Check>
The following procedure was newly added for M044.
Procedure for Printer (M044)
1. Turn on the main power switch.
2. Enter the SP mode and then select SP2109-3.
3. Select Pattern 8 (Grid Pattern Large), and then touch [OK].
4. Press the "APL Window" button at the top of the LCD.
5. Select a paper tray and print mode (simplex or duplex).
To Next Page
Loading...
