Technical Bulletin PAGE: 35/58
Model: Taurus-C1 / P1 Date: 21-Oct-11 No.: RD074026
< Fusing Cleaning Unit \ Web Supply Roller >
“Note” on re-assemblage of the Web Supply Roller was added.
• Note carefully how the web is routed from the supply roller [1] under the actuator [2], and over the
contact roller [3] to the take-up roller [4]. Make sure the unit is re-assembled this way.
< Left Drawer \ Exit Relay Motor >
Indication of the removing screw was corrected.
Before the Revision After the Revision
< Left Drawer \ Invert Exit Motor >
Indication of the removing screw was corrected.
Before the Revision After the Revision
To Next Page
Loading...
