Riso A2 - Ink and Ventilation Safety

9
Power Connection
Grounding
• Use a power supply that meets the electric rating of this machine. Failure to do so may result in fire or electric
shock.
• Use a power cable specified by Riso. If the power cord does not meet the electric rating of this machine, it may
result in fire or electric shock.
• Do not use a multiple socket adaptor or extension cord, or overload the electrical circuit. If an extension cord is
necessary, be sure the extension cord meets the electric rating of this machine. Do not extend the cord for more
than 5 m. This may result in fire or electric shock.
• Do not damage, break, or process the power cord. Putting a heavy object on the power cord, or pulling or forcibly
bending the cord may result in fire or electric shock.
• Do not plug or unplug the power cord if your hands are wet. This can result in electric shock.
WARNING
• When unplugging the power cord, remove by holding the plug. Do not pull on the power cord. Failure to do so can
damage the cord and result in fire or electric shock.
• Remove the power cord plug from the electrical outlet at least once a year. Clean the prongs and the area around
the plug. Dust collected on these areas can result in fire.
• If the machine is unused for long periods of time, unplug the power cord from the outlet for safety reasons.
CAUTION
• To avoid contact failure of the plug with the power supply, ensure the plug is fully inserted into the wall outlet.
• Ensure the POWER switch is turned off when connecting or disconnecting the power cord.
• This machine has an [Auto Power-OFF] function. This turns [OFF] the power of the machine automatically, when the machine
is not used for a pre-specified period of time.
p.93 "Customizing Initial Settings [Custom Setting mode] / Auto Power-OFF"
IMPORTANT!
• Ensure a power plug with a ground conductor is inserted into the wall outlet for proper grounding.
When the machine is not grounded, a short circuit may occur, resulting in fire or electric shock.
WARNING