Manually Installing the Printer Driver
144
A Appendixes
A.1 Manually Installing the Printer Driver
The procedure to install the Printer Driver without using the installer is described here.
For a USB Cable Connection
For Windows XP
1
Turn on the power of the machine, and then connect the USB cable to the machine.
2
Start the computer, and then insert the "RISO Printer Driver" CD-ROM to the computer's CD-ROM drive.
3
Connect the USB cable to the computer.
4
Install the Printer Driver according to the instructions on the [Found New Hardware Wizard] window.
(1) Select [Install from a list or specified location], and [Don’t search. I will choose the driver to install.], and then
click [Next].
(2) Click [Have Disk], and then select the inf file of the driver to install.
(CD-ROM): [Windows 32-bit]-[Driver]-[WinXP]-[English]-RISODRV.INF
(3) Select [RISO A2 Series], and then click [Next].
(4) Complete the Wizard window.
5
Restart the computer.
6
Open [Control Panel]-[Printers and Fax] in this order, and then open the properties of the printer in which the
Printer Driver has been installed.
7
Click [Print Processor] of the [Advanced] tab.
• To install the Printer Driver, you are required to log on to Windows by the account with the authority to change the system setting (such
as Administrator).
• Server OS and printer sharing are not supported.
To Next Page
Loading...