Emptying the Master Disposal Box
112
Replacing and disposing consumables
6.3 Emptying the Master Disposal Box
Ejected Masters are sent to the Master Disposable Box.
When the capacity of the Master Disposable Box becomes full, the Empty Disposal Box indicator lights. Dispose the ejected
Masters.
1
Pull out the Master Disposal Box.
Grasp the Master Disposal Box Handle (2 locations) and
pull out the box towards the front.
2
Discard the ejected masters.
Tilt the Master Disposal Box downward and discard the
used masters inside the box.
3
Place the Master Disposal Box into
position.
Insert the Master Disposal Box as far in as it will go.
To Next Page
Loading...