Riso A2 - USB Device Association

Preparing to Print (Computer Side)
42
Basic Operation
6
Disconnect the USB cable from the computer.
USB Device Association
1
Connect the computer to the machine with a USB cable.
The USB device is automatically associated with the computer. Check the result of the USB device association
in Step 2 and after.
2
Activate [Device Manager].
 For Windows Vista:
Click on [Start]-[Control Panel]-[Hardware and Sound]-[Device Manager].
 For Windows 7:
Click on [Start]-[Control Panel]-[Hardware and Sound]-[Device Manager].
3
Click [View] in the menu, and then place a checkmark in the [Show hidden
devices] checkbox.
4
Click [Printers] in the list, and then check that the newly installed printer is
registered.
5
Open [Devices and Printers] ([Hardware and Sound]-[Printers] for Windows
Vista), and then check that the newly installed printer is registered.
Associate the USB device after installing the Printer Driver.
IMPORTANT!