Riso A2 - Page 147

Manually Installing the Printer Driver
145
Appendixes
8
Select [R35X8IP] from the list of print processors, and then click it.
9
Select [NT EMF 1.008] from the list of default data types, and then click [OK].
10
Print the test page.
For Windows Vista
1
Turn on the power of the machine, and then connect the USB cable to the machine.
2
Start the computer.
3
Connect the USB cable to the computer.
4
In the [Found New Hardware] window, select [Locate and install driver software], and then [Don’t search online].
5
Select [I don’t have the disk. Show me other options.], and then [Browse my computer for driver software].
6
Insert the [RISO Printer Driver] CD-ROM to the computer's CD-ROM drive.
7
In the [Browse] window, select the inf file of the driver to install.
For Windows Vista (32-bit):
(CD-ROM): [Windows 32-bit]-[Driver]-[WinVista_8]-[English]-RISODRV.INF
For Windows Vista (64-bit):
(CD-ROM): [Windows 64-bit]-[Driver]-[WinVista_8]-[English]-RISODRV.INF
8
Select [RISO A2 Series], and then click [Next].
9
Restart the computer.
10
Open [Control Panel]-[Hardware and Sound] in this order, and then open the properties of the printer in which
the Printer Driver has been installed.
11
Click [Print processor] of the [Advanced] tab.