Riso A2 - Page 148

Manually Installing the Printer Driver
146
Appendixes
12
Select the following print processor from the list, and then click it.
For Windows Vista (32-bit): [R35V8IP]
For Windows Vista (64-bit): [R35V6IP]
13
Select [NT EMF 1.008] from the list of default data types, and then click [OK].
14
Print the test page.
For Windows 7
1
Turn on the power of the machine, and then connect the USB cable to the machine.
2
Start the computer.
3
Connect the USB cable to the computer.
4
Activate [Device Manager].
Enter “Device Manager” in [Start]-[Search programs and files] box, and then click [Device Manager] from the
menu that appears.
5
Right-click [Other devices]-[RISO A2 Series], and then click [Update Driver Software] from the menu that
appears.
6
Click [Browse my computer for driver software].
7
Insert the [RISO Printer Driver] CD-ROM to the computer's CD-ROM drive.
8
Click [Browse], select the folder shown below and click [OK].
For Windows 7 (32-bit):
(CD-ROM): [Windows 32-bit]-[Driver]-[WinVista_8]-[English]
For Windows 7 (64-bit):
(CD-ROM): [Windows 64-bit]-[Driver]-[WinVista_8]-[English]
9
Click [Next].
Installation starts.
Do not proceed to the following steps until [Device driver software was not successfully Installed] appears in the task tray.
IMPORTANT!