Riso A2 - Page 149

Manually Installing the Printer Driver
147
Appendixes
10
Click [Close] and restart the computer.
11
Open [Control Panel]-[Hardware and Sound]-[Devices and Printers] in this order, then right-click on the installed
[RISO A2 Series], and then click [Printer properties] from the menu that appears.
12
Click [Print processor] of the [Advanced] tab.
13
Select the following print processor from the list, and then click it.
For Windows 7 (32-bit): [R35V8IP]
For Windows 7 (64-bit): [R35V6IP]
14
Select [NT EMF 1.008] from the list of default data types, and then click [OK].
15
Print a test page from the [General] tab.
16
Click [Close] to close the window.
For Windows 8/Windows 8.1
1
Turn on the power of the machine, and then connect the USB cable to the machine.
2
Start the computer.
3
Connect the USB cable to the computer.
4
Activate [Device Manager].
Open [Control Panel]-[Hardware and Sound]-[Device Manager] in this order.
5
Right-click [Other devices]-[RISO A2 Series], and then click [Update Driver Software] from the menu that
appears.
6
Click [Browse my computer for driver software].
7
Insert the [RISO Printer Driver] CD-ROM to the computer's CD-ROM drive.
If the printer name is not shown, click [Actions]-[Scan for hardware changes].
NOTE