70 Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Chapter 6 Configure the IO-Link Device
Device Info View
The Device Info view displays device and status information about the device when the project
is online and lets you reset the module.
Use this view to complete the following tasks during configuration:
• Determine the identity of the device.
• Monitor the Status of the device.
• Refresh the data on the screen.
• Reset the device.
• Reset the device to Factory Defaults.
WARNING: If StdDirectVariableRef or DirectParameterOverly is present in the
device IODD, the device might not return an error if the device does not support
or cannot execute the reset command.
To Next Page
Loading...
