Rohde & Schwarz R&S ZVA 8 - Page 758

TRACe... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.296 E-6
TRACe...
This subsystem handles active trace data and trace data stored in the analyzer's internal memory.
Trace data is transferred in either ASCII or block data (REAL) format, depending on the
FORMat[:DATA] setting. If the block data format is used, it is recommended to select EOI as
receive terminator (SYSTem:COMMunicate:GPIB[:SELF]:RTERminator EOI).
Reserved Trace Names
The commands in the TRACe... menu use the following ZVR-compatible parameters to specify traces:
Parameter Meaning Used in
CH1DATA,
CH2DATA,
CH3DATA,
CH4DATA
Active data trace of
channels 1 to 4
TRACe:COPY
TRACe[:DATA][:RESPonse][:ALL]?
TRACe[:DATA][:STIMulus][:ALL]?
CALCulate<Ch/Tr>:MATH[:EXPRession][:DEFine]
CH1MEM,
CH2MEM,
CH3MEM,
CH4MEM
Active memory trace
associated to the
active data trace
CH1DATA,
CH2DATA,
CH3DATA,
CH4DATA,
respectively.
TRACe[:DATA][:RESPonse][:ALL]?
TRACe[:DATA][:STIMulus][:ALL]?
IMPLied
Active data trace,
addressed with
<Ch/Tr>
CALCulate<Ch/Tr>:MATH[:EXPRession][:DEFine]
CHMem
Active memory trace
assigned to the
IMPlied trace
CALCulate<Ch/Tr>:MATH[:EXPRession][:DEFine]
MDATA1,
MDATA2,
MDATA3,
MDATA4,
MDATA5,
MDATA6,
MDATA7,
MDATA8
Memory trace named
Mem<n>[Trc<m>].
The trace name is
unique because <n>
counts all data and
memory traces in the
active setup.
TRACe:CLEar
TRACe:COPY
TRACe[:DATA][:RESPonse][:ALL]?
TRACe[:DATA][:STIMulus][:ALL]?
CALCulate<Ch/Tr>:MATH[:EXPRession][:DEFine]
TRACe:CLEar MDATA1 | MDATA2 | MDATA3 | MDATA4 | MDATA5 | MDATA6 |
MDATA7 | MDATA8
Deletes one of the memory traces Mem<n>[Trc<m>], where n = 1, ... 8.
Parameters
Identifier for the memory trace; see list of trace names. .
Range [def. unit] MDATA<n> where <n> = 1 to 8. [–]