Rohde & Schwarz Scope Rider RTH1004 - Page 369

Remote Control Commands
R&S
®
Scope Rider RTH
369User Manual 1326.1578.02 ─ 12
HARMonic:FUNDamental:USER <UserFrequency>
Defines the user-defined fundamental frequency if HARMonic:FUNDamental:TYPEis
set to USER.
Parameters:
<UserFrequency> Range: 10 to 1E+6
Increment: 0.1
*RST: 50
Default unit: Hz
Example:
HARMonic:FUNDamental:TYPE USER
HARMonic:FUNDamental:USER 123
HARMonic:FUNDamental:CURRent?
//Result: 123
HARMonic:FUNDamental:CURRent?
Returns the current fundamental frequency.
Return values:
<CurrFreq> Range: 10 to 1E+6
Increment: 0.01
*RST: 50
Default unit: Hz
Usage: Query only
HARMonic:LIMits:NAME <FileName>
Parameters:
<FileName> String containing the path and name of the user-defined configu-
ration file to be loaded.
Example:
HARM:LIM:NAME
'/media/SD/Rohde-Schwarz/RTH/Harmonic/LimitExample.csv'
HARM:LIM:LOAD
HARMonic:LIMits:LOAD
Loads the file selected by HARMonic:LIMits:NAME on page 369.
Example:
HARM:LIM:NAME
'/media/SD/Rohde-Schwarz/RTH/Harmonic/LimitExample.csv'
HARM:LIM:LOAD
Usage: Event
Spectrum Analysis