Rohde & Schwarz Scope Rider RTH1004 - Page 431

Remote Control Commands
R&S
®
Scope Rider RTH
431User Manual 1326.1578.02 ─ 12
BUS:I2C:FCOunt?
Returns the number of decoded frames.
Return values:
<Count> Total number of decoded frames.
Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS:I2C:FRAMe<m>:AACCess?
Returns the address acknowledge bit value for the indicated frame.
Suffix:
<m>
.
*
Return values:
<AddressAckBit> INComplete | ACK | NACK | EITHer
*RST: INComplete
Usage: Query only
BUS:I2C:FRAMe<m>:ACCess?
Returns the value of the R/W bit of the indicated frame.
Suffix:
<m>
.
*
Return values:
<RWBit> READ | WRITe | EITHer | UNDefined
*RST: UNDefined
Usage: Query only
BUS:I2C:FRAMe<m>:ACOMplete?
Returns if the address is completely contained in the acquisition.
Suffix:
<m>
.
*
Return values:
<AddressComplete> 1 | 0
*RST: OFF
Usage: Query only
Protocol Analysis