R&S SMB User Correction
1407.0806.32 4.41 E-2
Goto
Selects row for editing.
If Goto row is selected, a window opens for entering
the requested row.
Remote-control command: n.a.
(it is not possible to change individual positions of
the list)
Insert Row(s)
Insert a new row before the marked row.
Remote-control command: n.a.
Save As
Open the file menu to save the list under a new
name.
Each list is saved to the R&S SMB Signal Generator
CompactFlash™ Card as a separate file with the file
prefix *.uco. The file name and the directory to
which the file is saved are user-selectable.
Important:
Save list only after filling both columns (frequency
and level), otherwise the entries are lost.
Remote-control command: n.a.
Save
The list is saved under its current name.
Important:
Save list only after filling both columns (frequency
and level), otherwise the entries are lost.
Remote-control command: n.a.
(the list is automatically saved after the values have
been entered)
Import/Export - User
Correction
Expands the menu with the area for import and export of user
correction files.
Externally edited Excel tables with frequency/level pairs can be
imported as text or CSV-files and used for user correction.
On the other hand, internally created user correction list can be
exported as text or CSV-files.
To Next Page
Loading...
