R&S SMB Legend for Front Panel View
1407.0812.62 1.3 E-2
2 Display
Display In addition the Winbar can be called with the
WINBAR key. The Winbar indicates open menus by
a labelled button. When a button is clicked using
the rotary knob, the associated menu is displayed
either in the foreground or minimized in the Winbar.
The block diagram shows the current configuration
and the signal flow in the generator with the aid of
function blocks containing an on/off switch. Clicking
the function block opens a list of associated setting
menus. Active menus and info windows are
displayed on top of the block diagram. The block
diagram can be displayed in the foreground anytime
with the
DIAGRAM key.
3 Keys for setting frequency and level
FREQ Activates frequency entry.
LEVEL Activates level entry.
See chapter 3, section
"Setting Parameters",
and chapter 4, section
"RF Signal" and
"Modulations"
4 Keypad for data entry
Keypad for data entry
0…9
Entry of numeric values
.
Entry of decimal point
–
Entry of sign
abc
Entry of letters
_
Entry of a space
*… #
Entry of special characters
A ↔ a
Switchover between uppercase and
lowercase letters.
See chapter 3, section
"Setting Parameters"
To Next Page
Loading...
