R&S SMB Legend for Front Panel View
1407.0812.62 1.7 E-2
5 Keys for settings and navigation in the display and for setting parameters
ESC
CLOSE
Calls the next higher selection level. This opens up
the following functions:
– Closes the active menu if the
cursor is in the top-level menu
(parameter selection).
– Switches between different entry
fields of a menu.
– Quits the editing mode and
restores the previous value. This
function is only available in the
editing mode, i.e. only before an
entry is confirmed or selected with
Enter.
– Cancels queries in message
windows.
– Shifts the entry cursor from the
frequency or level display to the
previously active menu, or to the
previously highlighted block in the
block diagram if no menu is active.
DIAGR
Brings the block diagram to the foreground. Active
menus are minimized. Active menus are indicated
by the buttons in the menu bar.
See chapter 3, section
"Setting Parameters"
6 Input for external AM / FM / PhiM signals
MOD EXT
Input for external modulation signals.
7 LF output
LF
Output for internal modulation generator
signal.
To Next Page
Loading...
