R&S SMB Command Description
1407.0806.32 6.7 E-2
CALibration:LEVel:STATe ON | OFF
The command switches on or off use of external level correction data. This switch can be used in
case of corrupt external level correction data.
Example:
CAL:LEV:STAT ON
'switches on use of external level correction data.
*RST value Resolution Options SCPI
ON - Device-specific
CALibration:LEVel[:MEASure]?
Performs all adjustments which affect the level. The aquired correction values improve the settling
time and the signal quality.
The command is a query command and therefore has no *RST value.
Example:
CAL:LEV?
'starts the level adjustment in the mixer range.
Response: 0
'the adjustments have been performed successfully.
*RST value Resolution Options SCPI
- - Device-specific
To Next Page
Loading...
