Rohde & Schwarz SMB 100a - Page 207

R&S SMB Command Description
1407.0806.32 6.15 E-2
Command Parameters Default unit Remark
MMEMory:CATalog? <path> Query only
MMEMory:CATalog:LENGth? Query only
MMEMory:CDIRectory <directory_name> No query
MMEMory:COPY <file_name>,<file_name> No query
MMEMory:DATA <file_name>[,<block>]
MMEMory:DCATalog? Query only
MMEMory:DCATalog:LENGth? Query only
MMEMory:DELete <file_name> No query
MMEMory:MDIRectory <directory_name> No query
MMEMory:MOVE <file_name>,<file_name> No query
MMEMory:MSIS <msus>
MMEMory:RDIRectory <directory_name>
MMEMory:STORe:STATe 0,<file_name>
MMEMory:CATalog? <path>
This command reads out the subdirectories and files in the specified directory. If no directory is
specified, the default directory selected with the MMEM:CDIR command is read out.
The response has the following format:
<used_bytes_in_this_directory>,<free_bytes_on_this_disk>,
<file_name>,<file_type>,<filesize_in_bytes>,
<file_name>,<file_type>,<filesize_in_bytes>, …
The command is a query command and therefore has no *RST value.
Parameters: <file_name>
File or directory name
<file_type>
File type. There are the following file types: DIR (directory), ASCii (ASCII file),
BINary (Binary file), and STATe (file with instrument settings).
<filesize_in_bytes>
File size. The size "0" is returned for a directory.
Example:
MMEM:CAT? '/var'
'reads out all files at the highest directory level of the CompactFlash™ Card.
Response:
"'127145265,175325184,"test,DIR,0","temp,DIR,0","readme.txt,ASC,1324","state.
savracl,STAT,5327","waveform.wv,BIN,2342"
'the directory var/ contains the subdirectories 'test' and 'temp' as well
as the files 'readme.txt', 'state.savrcl' and 'waveform.wv' which
have different file types.
*RST value Resolution Options SCPI
- - Compliant