Command Description R&S SMB
1407.0806.32 6.16 E-2
MMEMory:CATalog:LENGth? <path>
This command reads out the number of files in the specified directory. If no directory is specified, the
default directory selected with the MMEM:CDIR command is read out.
The command is a query command and therefore has no *RST value.
Example:
MMEM:CAT:LENG? 'var/’
'reads out the number of files at the highest directory level of the
CompactFlash™ Card.
Response: 1
'there is 1 file at the highest directory level of the memory stick.
*RST value Resolution Options SCPI
- - Device-specific
MMEMory:CDIRectory <directory_name>
This command changes the default directory. This directory is used for all subsequent MMEM
commands if no path is specified with them. It is also possible to change to a higher directory using
two dots '..' .
Example:
MMEM:CDIR 'test'
'changes from the current directory level to the subdirectory 'test'.
*RST value Resolution Options SCPI
/Var - Compliant
MMEMory:COPY <source>[,<destination>]
This command copies the first specified file to the second specified file. Instead of just a file, this
command can also be used to copy a complete directory together with all its files.
If <destination> is not specified, <source> is copied to the MMEM:CDIR directory. Files which already
exist with the same name in the destination directory are overwritten without an error message.
It is also possible to specify the path using another parameter. The command is:
MMEMory:COPY <file_source><msus_source>[,<file_destination>,<msus_destination>]
The command triggers an event and therefore has no query form and no *RST value.
Example:
MMEM:COPY 'var/rs_gen/test1.savrcl,'var/temp'
'copies the file 'test1.savrcl' in the USER directory on the internal
CompactFlash™ Card to the TEMP directory without changing the file name.
*RST value Resolution Options SCPI
- - Compliant
To Next Page
Loading...
