Command Description R&S SMB
1407.0806.32 6.30 E-2
[SOURce:]CORRection:DEXChange:AFILe:SEParator:DECimal DOT | COMMa
The command the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Example:
CORR:DEXC:MODE EXP
'selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects ASCII file ucor.csv as destination for the user correction list data.
CORR:DEXC:AFIL:SEP:COL TAB
'the pairs of frequency and level values are separated by a tabulator.
CORR:DEXC:AFIL:SEP:DEC DOT
'selects the decimal separator dot.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the user correction list ucor_imp is imported into ASCII file
ucor.csv .
*RST value Resolution Options SCPI
DOT - Device-specific
[SOURce:]CORRection:DEXChange:EXECute
The command starts the export or import of the selected file. When import is selected, the ASCII file
is imported as user correction list. When export is selected, the user correction list is exported into
the selected ASCII file.
The command triggers an event and therefore has no *RST value.
Example:
CORR:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into user correction lists.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the ASCII file ucor.csv is imported into user correction list
ucor_imp.
CORR:DEXC:EXEC
'starts the import of the ASCII file data into the user correction file.
*RST value Resolution Options SCPI
- - Device-specific
To Next Page
Loading...
