R&S SMB Command Description
1407.0806.32 6.55 E-2
[SOURce:]LIST:DEXChange:MODE IMPort | EXPort
The command selects if list mode lists should be imported or exported. Depending on the selection
her, the file select command define either the source or the destination for list mode lists and ASCII
files.
Example:
LIST:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into list mode lists.
LIST:DEXC:AFIL:SEL '‘var/rs_gen/listmode/import/list.csv'
'selects that ASCII file list.csv is imported.
LIST:DEXC:SEL '‘var/rs_gen/listmode/import/list_imp'
'selects that the ASCII file list.csv is imported into list mode list list_imp.
*RST value Resolution Options SCPI
- - Device-specific
[SOURce:]LIST:DEXChange:SELect <list_name>
The command selects the list mode list to be imported or exported. .
The list mode files are stored with the fixed file extensions *.lsw in a directory of the user's choice.
The directory applicable to the commands is defined with the command MMEMory:CDIR. A path
can also be specified in command SOUR:LIST:DEXC:SEL, in which case the files are stored or
loaded in the specified directory.
Example:
LIST:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into list mode lists.
LIST:DEXC:AFIL:SEL '‘var/rs_gen/listmode/import/list.csv'
'selects that ASCII file list.csv is imported.
LIST:DEXC:SEL '‘var/rs_gen/listmode/import/list_imp'
'selects that the ASCII file list.csv is imported into list mode list list_imp.
*RST value Resolution Options SCPI
- - Device-specific
[SOURce:]LIST:DWELl 1 ms ... 1 s
The command sets the time for which the instrument retains a setting.
Example:
LIST:DWEL 15
'each setting in the list is retained for 15 ms.
*RST value Resolution Options SCPI
10 ms - Compliant
To Next Page
Loading...
