4
Part of
Practice
Chapter 4
Part of Practice
Fully Utilizing Preset Function ....................................................102
Saving Various Settings as a Name Assigned Preset .............102
Loading a Saved Preset ..........................................................103
Automatic loading of a saved preset when media is loaded....104
Fully Utilize the Media Heating System .....................................105
What Is the Media Heating System? .......................................105
Making the Temperature Setting for the Media Heating System
106
Control of Media Heating System during Preheating ..............108
Drying the Trailing Edge of the Printing Area on the Dryer ......108
Setting the Drying Time after Printing ......................................109
Using an Optional Dryer ..........................................................110
Using a Blower-fan Unit ........................................................... 110
Fully Utilizing the Correction Function ....................................... 111
Correcting for Misalignment in Bidirectional Printing ............... 111
Correcting for Misalignment in Bidirectional Printing More Precisely ....112
Alleviating Horizontal Bands and the Like (feed correction function) ...112
Accommodating to the Types and Condition of Media ...............114
Adjusting Head Height to Match Media Thickness ..................114
Using Transparent Media ........................................................115
Printing Hard-to-dry Media ......................................................115
Using the Media Easy to be Winkled/Hard to be Fed .............. 116
Speeding Up Output for Narrow Media ...................................117
Preventing Soiling of the Media and Dot Drop-out ..................118
Using Sticky Media ..................................................................119
Fully Utilizing Cutting Function ...................................................120
Hints and Tips for Cutting Setting ............................................120
Preventing Pulling of the Media with Undue Force When Performing
Cutting Only
..............................................................................120
Fine-tuning the Cutting Conditions ..........................................121
Accurately Adjusting the Cutting-in Amount.............................123
Performing Distance Correction During Cutting ......................124
Correcting Misalignment of the Printing and Cutting Positions 125
Prioritize The Cuttings Settings of This Machine to The Settings of
a Computer Side in Software RIP
.............................................127
Viewing the Automatic Environment Correction Function Settings ...
128
Performing Printing and Cutting Separately...............................129
To Perform Printing and Cutting Separately ............................129
Printing with Crop Marks .........................................................129
Aligning Automatically and Cutting ..........................................131
Aligning Manually and Cutting .................................................133
Correcting Misalignment for Printing and Cutting Position When
Using Crop Marks ....................................................................134
Using Media Take-up System ....................................................137
Features of the Take-up System ..............................................137
What to Select at the Time of Media Setup .............................137
Operating Conditions for the Take-up System .........................137
About the Paper Tube..............................................................138
How to Take Up Media ............................................................138
How to Remove Taken-up Media ............................................143
101
To Next Page
Loading...
Need help?
General
