Roland XR-640 - Replacing the Felt Wiper

3
Maintenance
Replacing Consumable Parts
92
Replacing the Felt Wiper
The felt wiper is the part used for cleaning of the print heads. When such
the screen is displayed on the display screen, it is the time for replacement.
Replace it with a new item.
Regarding the purchase of the felt wiper, contact your authorized Roland DG Corp. dealer.
CAUTION
Be sure to perform operations as specied by these instructions, and
never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
1. Enter the felt wiper replacement menu.

When the message shown in the gure appears, press
.

Remove any media.

Press .

Press several times until the screen shown on
the left appears.
Press
, and then .

Press .
Press
twice.

Press .
The print-head carriage moves to a location where felt wiper replace-
ment is possible, and then the screen shown in the gure appears.
TIME FOR
FELT REPLACE
TIME FOR
FELT REPLACE
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE FELT
OPEN FRONT
COVER
NOW PROCESSING. .