4
Fully Utilizing Cutting Function
Part of
Practice
128
Viewing the Automatic Environment Correction Function Settings
The automatic environment correction function is the function that adjusts automatically to the optimal
condition of this machine according to the operating environment (humidity and temperature). Performing
automatic adjustment can reduce misalignment in the scanning direction (the direction of head movement)
during printing or cutting. Normally set to “ENABLE.”
Procedure
Hold down and press .
Press to display the left gure.
Press
.
Check that setting is “ENABLE.”
Press
to select an item to change the
setting.
Press
to enable the setting.
Press in this order to go back to the original screen.
Default Setting
[AUTO ENV. MATCH]: ENABLE
To Next Page
Loading...
