Roland XR-640 - System Management of Printer; Setting for the Menu Language and the Units of Measurement; Setting the Interval until Activation of the Sleep Mode (Power Saving Function); Function)

150
5
To Administrators
System Management of Printer
Setting for the Menu Language and the Units of Measurement
This sets the language and units of measurement displayed on the display screen of the operation panel.
Procedure

Hold down and switch on the sub power.

Use to select the display (menu) language.
Press
to enable the setting.

Use to select the measurement unit for length.
Press
to enable the setting.

Use to select to the measurement unit for
temperature.
Press
to enable the setting.
Default Setting
[MENU LANGUAGE]: ENGLISH
[LENGTH UNIT]: mm
[TEMP. UNIT]: °C
Setting the Interval until Activation of the Sleep Mode (Power Saving Function)
Procedure

Press .

Press several times to display the screen shown on
the left.
Press
.

Press several times to display the screen shown on
the left.
Press
twice.

Use to make the setting.
Press
to enable the setting.

Press in this order to go back to the original
screen.
Default Setting
[INTERVAL]: 30min
MENU LANGUAGE
ENGLISH
LENGTH UNIT
mm INCH
TEMP. UNIT
°C °F
MENU
SUB MENU
SUB MENU
SLEEP
INTERVAL
30 min 15 min
W 1346 mm
SETUP SHEET
ROLL