Roland XR-640 - Output Operation Management; Printing a System Report; Determining What Happens When Ink Runs out

146
5
To Administrators
Output Operation Management
Printing a System Report
This prints system information, including a list of setting values.
Procedure

Press .

Press several times to display the screen shown on
the left.
Press
.

Press several times to display the screen shown on
the left.
Press
.
Start printing.

Press in this order to go back to the original screen.
Determining What Happens When Ink Runs Out
This lets you change, according to your purpose, the operation that takes place when an ink cartridge is empty.
Procedure

Press .

Press several times to display the screen shown on
the left.
Press
.
Press
twice.

Press twice.

Press to select.
"STOP": Printing pauses immediately when a cartridge becomes empty.
"CONT" (continue): Printing does not stop when a cartridge becomes empty.
When a cartridge becomes empty, a warning beep sounds.
Press to enable the setting.

Press in this order to go back to the original screen.
Description
When "STOP" is selected, printing pauses and so colors may be uneven. Ensure a sucient amount of remain-
ing ink before you begin printing.
When "CONT" is selected, printing does not stop even if ink runs out completely. To replace the cartridge, wait
until printing ends or press
to pause printing.
MENU
SUB MENU
SUB MENU
SYSTEM REPORT
MENU
SUB MENU
SUB MENU
INK CONTROL
EMPTY MODE
STOP CONT.