2
Basic
Operation
Loading Media
49
Performing the Initial Adjustment (Correcting for Misalignment in Bidirectional Printing More Precisely)
Perform the initial adjustment (correction for misalignment in bidirectional printing more precisely) of this
machine. In the following case, perform this adjustment.
When using this machine for the rst time
When changing the media to use for the rst time
When further correction is required to improve printing, such as when simple correction is performed for
misalignment in bidirectional printing.P. 111, "Correcting for Misalignment in Bidirectional Printing"
1.
Print a test pattern.
Press .
Press several times to display the screen shown
on the left.
Press
, and then .
Press .
Press .
A test pattern is printed.
When printing ends, then press .
2.
Read the correction values from the test pattern.
Choose the value that produces the least misalignment of 2lines.
To Next Page
Loading...
