Roland XR-640 - How to Replace Ink Cartridges

Checking for Remaining Ink and Replacing Cartridges
3
Maintenance
75
How to Replace Ink Cartridges
When ink runs out, a warning beep sounds and printing pauses (unless the factory default settings have been
changed). Pull out the empty cartridge and insert a new one. Printing resumes.
WARNING
Never store ink, cleaning liquid, or discharged uid in any of the following
locations.
 Any location exposed to open ame
 Any location where high temperature may occur
 Near bleach or any other such oxidizing agent or explosive material
 Any location within the reach of children
Fire may be a danger. Accidental ingestion by children may pose a health
hazard.
Important Notes on Replacing Cartridges
 Insert and remove slowly, one at a time.
 Be sure to replace with an item of identical type.
 Never use an ink cartridge which has already been used in other machines even if it is of the
identical type.
 Never mix items of dierent types.
 Never allow the machine to stand with an ink cartridge removed. The print heads may become
clogged.
 Never insert or remove a partially used ink cartridge.
 Never remove an ink cartridge suddenly while the printer is in operation.
The slot number for the
empty cartridge ashes.
Make sure to
gently shake the
new cartridge be-
fore inserting it.
Replace with an item of identical
type and color.
 Insert the cartridge in the direction of arrow
shown in the gure.
 Insert and remove slowly, one at a time.
 Insert rmly, as far as it will go.