Roland XR-640 - Specifications

184
7
Main Specications
Specications
XR-640
Printing/cutting method
Piezo ink-jet method/media-moving method
Media Width
315 to 1,625 mm (12.4 to 64 in.)
Thickness
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner,
for cutting
Roll outer diam-
eter
Maximum 210 mm (8.3 in.)
Roll weight
Max. 40 kg (88 lb.)
Core diameter
76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing/cutting width (*1)
Max. 1,600 mm (63 in.)
Ink
cartridges
Types
440-cc cartridge (cyan, magenta, yellow, black, light cyan, light magenta,
light black)
220-cc cartridge (metallic silver, white)
Colors
Seven colors (cyan, magenta, yellow, black, light cyan, light magenta, light
black) or,
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, light
black, white) or,
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, light
black, metallic silver) or,
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta,
metallic silver, white)
Printing resolution (dots per
inch)
Maximum 1,440 dpi
Cutting speed
10 to 600 mm/s (Media-feed direction: 10 to 300 mm/s)
Blade force
30 to 300 gf
Cutting
blade
Type
Roland CAMM-1 series compatible
Blade offset
0.000 to 1.500 mm(0 to 0.059 in.)
Software resolution
(when cutting)
0.025 mm/step
Distance accuracy
(when printing) (*2)(*3)
Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is
greater
Distance accuracy
(when cutting) (*2)
Error of less than ±0.4 % of distance traveled, or ±0.3 mm, whichever is
greater
When distance correction has been performed (when the setting for [CUT-
TING MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of
distance traveled, or ±0.1 mm, whichever is greater
Repeatability
(when cutting) (*2)(*4)
±0.1 mm or less
Alignment accuracy for printing
and cutting (*2)(*5)
±0.5 mm or less
Alignment accuracy for print-
ing and cutting when reloading
media (*2)(*6)
Error of less than ±0.5 % of distance traveled, or ±3 mm, whichever is greater
Dryer unit
Heating type, setting range for the preset temperature: 30 to 55°C (86 to
130°F)
Ink-xing device (*7)
Print heater / preheater, setting range for the preset temperature: 30 to
50°C (86 to 122°F)
Connectivity
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function
Automatic sleep feature
Power requirements
AC 100 to 120 V ±10%, 12 A, 50/60 Hz or AC 220 to 240 V ±10%, 6.5 A,
50/60 Hz
Power During operation
Approx. 1,600 W
Sleep mode
Approx. 47 W
Acoustic
noise level
During operation
65 dB (A) or less
During standby
45 dB (A) or less