Accommodating to the Types and Condition of Media
4
Part of
Practice
116
Description
You use this when ink dries poorly even when the media heating system is used. You can also make this set-
ting on the software RIP. When you have made the setting on the software RIP , the setting is used and the
printer's setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF
Using the Media Easy to be Winkled/Hard to be Fed
Procedure
Press .
Press several times to display the screen shown
on the left.
Press
.
Press
twice.
Press .
Press to select a value.
0 to 100%
A larger value produces a larger suction force. For the media easy to
be loose due to warping or winkling, increase of the suction force
may help correct the problem. When the media is imsy and cannot
move smoothly, reduction of the suction force may correct such the
problem.
AUTO
The suction force is automatically adjusted to the optimal level for
the media width.
Press to enable the setting.
Press in this order to go back to the original screen.
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the mature and condition of the media.
You can also make this setting on the software RIP. When you have made the setting on the software RIP, the
RIP's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
To Next Page
Loading...
