Fully Utilizing the Correction Function
4
Part of
Practice
113
Description
The movement distance of media experiences subtle changes due to the thickness of the media and the tem-
perature of the media heating system. When the movement distance becomes discrepant, horizontal stripes
are more likely to occur during printing. We recommend performing correction to match the media you're
using and the media heating system. Repeat the process of printing a test pattern and entering a correction
value several times to nd the optimal value.
You can also make this setting on the software RIP computer (by, for example, choosing the media type in
the software RIP you are using). When you have made the setting on the computer, the computer's setting is
used and the printer's setting is ignored.
Default Setting
[SETTING]: 0.00%
To Next Page
Loading...
