A Message Appears
6
FAQ
174
[TIME FOR MAINTENANCE]
It is time to clean the printer heads manually. After verifying, press .
P. 83, "Manual Cleaning of Print Heads"
[TIME FOR WIPER (FELT) REPLACE]
It is time to replace the wiper or felt wiper. After verifying, press .
P. 89, "Replacing the Wiper"
P. 92, "Replacing the Felt Wiper"
[OPEN THE VALVE]
Open the valve. The valve described here is the part you handle when you clean heads to perform the rst ink
lling after purchasing this machine. Do not operate this except when lling ink for the rst time and "Select-
ing the ink type". If you try to close the valve in an undesirable manner, it may cause troubles including NG
ink discharge.
"Setup Guide"
P. 153, "How to change the ink type"
To Next Page
Loading...
