Loading Media
2
Basic
Operation
43
Check both edges of the media are placed on the grit rollers.
Be sure to place the right edge of the media on the right end grit rollers.
Place the left and right pinch rollers on both edges of the media.
Place them on the positions from the media edges by about 10 mm respectively.
If you want to readjust the media position at this step, go back to the procedure 1 and redo the procedure
1.
-
. Printing
quality is aected due to skew media feed, if you hold the media only to readjust the position forcibly.
About 10 mm
About 10 mm
Left side pinch roller
Right side pinch roller
Grit roller
Grit roller
To Next Page
Loading...
