2
Basic
Operation
Setup of Media
61
Press to set the item.
Press
to enable the setting.
For the individual setting method of this setting item and the description, refer to P. 109, "Setting the
Drying Time after Printing"
11.
Saving the Setting as Preset
Press to select [SAVE].
Press
to enable the setting.
If you select [NEXT], the performed settings are retained. But your
settings are overwritten or deleted, when you operate the [Media
Setting] menu again or switch o the main power of this machine.
Use to select [Destination to Save].
You can select one of NAME1 to 8.
Press to enable the setting.
Use to select characters.
Use
to move the next character.
Select the following characters in the same way.
You can enter up to15 characters.
Press to enable the setting.
For the individual setting method of this setting item and the description, refer to P. 102, "Saving Various
Settings as a Name Assigned Preset"
This completes the operation of the [Media Setting] menu.
DRYING TIME
10min 10min
Example of setting time (general guide):
* The setting time varies according to the settings of type of media
and printing quality.
<Condition> Output accompanying pull-back; use the middle
pinch rollers; non-coated vinyl media
<Setting time> about three minutes
Drying Time after Printing
Set the drying time after the 1st page is printed. The next operation is not started until the set time
passes.
PRESET
[SAVE] NEXT
SAVE TO
NAME1
SET NAME
COMPLETED
Current setting Setting after
changed
To Next Page
Loading...
