Roland XR-640 - Page 8

Contents
6
Company names and product names are trademarks or registered trademarks of their respective holders.
Copyright © 2012 Roland DG Corporation
http://www.rolanddg.com/
Media Feed is Not Smooth ........................................................................ 168
Media Wrinkles or Shrinks ........................................................................................................ 168
Media Feed Is Not Straight ....................................................................................................... 169
Media Feed Is Not Smooth ....................................................................................................... 169
The Media Cannot Be Taken Up Smoothly ...............................................170
The Media Cannot Be Taken Up Smoothly ......................................................................... 170
Print Heads Stop Moving. Why? ...............................................................171
What to Do First ........................................................................................................................... 171
If the Print Heads Still Do Not Move ..................................................................................... 171
A Message Appears ..................................................................................173
An Error Message Appears .......................................................................175
Chapter 7 Main Specications ........................................................................ 179
Printing/Cutting Area .................................................................................180
Maximum Area ............................................................................................................................. 180
Maximum Area When Using Crop Marks ............................................................................ 180
The Media-cuto Location During Continuous Printing .............................................. 181
About the Blade ......................................................................................... 182
Locations of the Power Rating and Serial Number Labels ........................183
Specications ............................................................................................184