Rotax 914 F - Page 102

102 pages

To Previous Page

To Previous Page

Loading...

Reference

Modification-No.

- 0 -

Page

102

Date

1996 05 10

Install

914 F

Leerseite

Table of Contents

1 Inhaltsverzeichnis 1) Table of Contents2
- Table of Contents2
2 Index6
3 Preface8
- Remarks8
- Engine Serial Number8
4 Safety8
- Repeating Symbols9
- Safety Information9
- Instruction11
- Technical Documentation12
5 List of the Current14
6 Table of Amendments15
7 Description of Design16
- Dsignation of Type16
- Standard Engine Design16
- Engine Components, Engine Views, Numbering of Cylinders, Definition of Main Axes18
8 Technical Data20
- Operating Limits20
- Installation Dimensions (All Dimensions in MM)21
- Weights21
- Centre of Gravity of Engine and Standard Equipment21
- Moments of Inertia in Kg Cm221
9 Preparations for Engine Installation22
- Transport22
- State of Delivery22
- Engine Preservation22
- Protective Covering23
10 Engine Suspension and Position24
- Definition of Attachment Points25
- Permissible Fitting Positions26
- General Directives for Engine Suspension28
11 Exhaust System30
- Operating Limits31
12 Cooling System32
- Description of the System32
- Operating Limits32
- Requirements on the Cooling System33
- Size and Position of Connections33
- Coolant Capacity34
- Feasible Location of Radiator35
- General Directives for the Cooling System36
- Cooling Air Ducting38
  - 1) General Directives for Ducting of the Cooling Air38
13 Lubrication System40
- Description of the System40
- Limits of Operation41
- Requirements on the Oil- and Venting Lines42
- Connecting Dimensions and Location of Connections43
- Feasible Position and Location of the Oil Tank46
- Feasible Position and Location of the Oil Cooler47
- General Notes on Oil Cooler47
- Filling Capacity47
14 Fuel System48
- Description of System48
- Operating Limits49
- Requirements of the Fuel System49
- Connecting Dimensions, Location of Joints and Directives for Installation50
  - 1) Electric Fuel Pump50
  - 2) Fuel Pressure Control52
- Notes on Checking of Fuel Pressure52
15 Carburetor54
- Requirements on the Carburetor54
- Connections for Bowden-Cable Actuation and Limit Load55
- Requirements on Cable Actuation56
- Requirements on the Throttle Lever57
- Location and Determination of the Throttle Position for Max. Continuous Power58
16 Air Intake System62
- Operating Limits62
- Requirements on the Air Intake System62
- Notes to Employment of the Air Filter65
17 Pressure Sensors67
- Static Pressure Sensor68
- Airbox Pressure Sensor69
  - 1) Water Trap69
18 Servo Motor70
19 Elektric System72
- Requirements on Circuit Wiring72
  - 1) Electromagnetic Compatibility (EMC)73
- Wiring Diagram74
- Description of the Turbo Control Unit (TCU)76
- Technical Data and Connection of the Electric Components78
- Internal Consumer of Electric Power89
20 Propeller Drive90
- Technical Data90
21 Vacuum Pump91
- Technical Data91
22 Hydraulic Governor for Constant Speed Propeller92
- Technical Data92
23 Connections for Instrumentation93
- Sensor for Cylinder Head Temperature93
- Sensor for Oil Temperature94
- Oil Pressure Sensor95
- Mechanical Rev-Counter or Hour-Meter96
- Monitoring of the Intake Manifold Pressure97
- Air Temperature in the Airbox97
24 Preparations for Trial Run of Engine98
25 AUTHORIZED DISTRIBUTORS for Aircraft Engines99

Other manuals for Rotax 914 F

Maintenance Manual274 pages

Related product manuals

Preview: Rotax 914 series

Rotax 914 series

Rotax 914 UL Series

Preview: Rotax 912-UL

Preview: Rotax MML-912

Preview: Rotax 912 ULS 3

Rotax 912 ULS 3

Preview: Rotax 912 Series

Rotax 912 Series

Preview: Rotax 912 i series

Rotax 912 i series

Preview: Rotax 912 iS Sport

Rotax 912 iS Sport

Preview: Rotax 915 i A SERIES

Rotax 915 i A SERIES

Rotax MMH-912 Series

Rotax 582 UL DCDI 90