Rotax 914 F Installation Manual

Reference
Modification-No.
- 0 -
Page
88
Date
1996 05 10
Install
914 F
19.4.13)Connection of the electric rev-counter
See Ill. 52/67.
Feeding wiring to electric rev-counter from the 36 pole receptacle of TCU.
➪ connections: flexible cable 0,75 mm
2
white No. 26*
flexible cable 0,75 mm
2
white No. 13*
* from the 36 plug receptacle of TCU without plug connection
➪ length approx. 1000 mm (40 in) from TCU.
◆ NOTE: BOMBARDIER-ROTAX developed especially for this application a
non-certified electric rev-counter. Certification to the latest require-
ments such as FAR or JAR has to be conducted by the aircraft
builder.
■ ATTENTION: The graphs depicting output signals have been determined and are
effective only at the following conditions.
ambient temperature: 20° C (68° F)
tolerance: ± 5%
The pick-up for the rev-counter generates one pulse per revolution. Pulse shape and
pulse voltage as per recordings (oscillogram).
1 revolution
360°
0
(+V)
(-V)
1
1
2
3
2
3
4
0
(+V)
(-V)
5
5
10
15
10
15
0
(+V)
(-V)
5
5
10
10
1 revolution
360°
1 revolution
360°
1 revolution
360°
0
(+V)
(-V)
50
50
100
100
150
speed 500 rpm (load 100 Ω)
speed 500 rpm (load 100 kΩ)
speed 6000 rpm (load 100 Ω) speed 6000 rpm (load 100 kΩ)
Ill. 67

Rotax 914 F Specifications

General

Brand	Rotax
Model	914 F
Category	Engine
Language	English