Reference
Modification-No.
- 0 -
Page
11
Date
1996 05 10
Install
914 F
➪ In addition to observing the instructions in our Manual, general safety and accident
preventative measures, legal regulations and regulations of any aeronautical
authority must be observed.
➪ Where differences exist between this Manual and regulations provided by any
authority, the more stringent regulation should be applied.
➪ This engine may be equipped with an Airborne air pump. The safety warning
accompanying the air pump must be given to the owner/operator of the aircraft into
which the air pump is installed.
4.3) Instruction
Engines require instructions regarding their application, use, operation, maintenance
and repair.
➪ Technical documentation and directions are useful and necessary complemen-
tary elements for personal instruction, but can by no means substitute theoretical
and practical instructions.
➪ These instructions should cover explanation of the technical context, advice for
operation, maintenance, use and operational safety of the engine.
➪ All technical directives relevant for safety are especially emphasized. Pass on
safety instructions to other users, without fail.
➪ This engine must only be operated with accessories supplied, recommended and
released by ROTAX. Modifications are only allowed after consent by the engine
manufacturer.
■ ATTENTION: Spare parts must meet with the requirements defined by the engine
manufacturer. This is only warranted by use of GENUINE ROTAX
spare parts and/or accessories (see spare parts list).
They are available only at the authorized ROTAX Distribution- and
Service partners.
The use of anything other than genuine ROTAX spare parts and/or
accessories will render any warranty relating to this engine null and
void (see Warranty Conditions).
▲ WARNING: Engine and gear box are delivered in "dry" conditions (without oil).
Before putting engine in operation it must be filled with oil. Use only
oil as specified (consult Operator‘s Manual).
◆ NOTE: For longer periods (longer than 2 months) of engine stop, preserva-
tion of engine is recommended (see chapter engine preservation in
Operator‘s Manual).
▲ WARNING: Exclusively use tools and supplementary materials as listed in the
spare parts list.
▲ WARNING: This Manual for engine installation is only part of the Technical
Documentation and will be supplemented by the respective Opera-
tor‘s Manual, Maintenance Manual and Spare Parts List.
Pay attention to references to other documentation, found in various
parts of this Manual.