Service life: 8 years after manufacture/shipment
Condition: The instrument shall be used by observing the handling precautions specified in the Operating Manual
or documents attached thereto, and inspected daily and maintained regularly according to the
instructions for maintenance/inspection.
The key components listed below and replacement parts mentioned in the maintenance/inspection
instructions shall be replaced as necessary according to the inspection results.
The table below lists the key components that are supplied as maintenance parts.
Various detection sensors
Air pump (excluding diaphragm)
* The above service life of the instrument and service lives of key components in years are not guaranteed; instead,
they are average periods calculated on the assumption that the aforementioned condition is met, and vary
depending on the environment and method in/by which the instrument is used, etc.
If the instrument is transported because it must be relocated or due to a problem, etc., disinfect/sterilize the
instrument according to the instructions provided in the Operating Manual, and pack the instrument.
Pack the instrument by following the unpacking method (p. 1-1) in reverse.
To Next Page
Loading...
Need help?
General
